莺歌海地区低电阻率气层测井响应特征与判别方法

文中概述了莺歌海地区低电阻率气层的主要测井响应特征,详细分析了低电阻率气层的成因,并提出了测井判别方法.特别强调指出局部发育的菱铁矿对该区地层电阻率无明显影响.     

随机徐变应力影响下重力坝时变可靠度初探

由于重力坝的随机温度场以及随机徐变应力场均为非平稳随机过程，由此所涉及的结构可靠度是非平稳向量随机过程非线性组合的时变可靠度．本文计入重力坝徐变应力场和混凝土强度随机性的影响，将时变可靠度的数值解法与随机有限元法相结合，模拟施工过程，对一典型重力坝的时变可靠度进行了计算，得出了一些有益的结论．     

泥沙输移矢量式及其应用

本文基于Parker等人泥沙输移矢量式的分析和研究，增加了上举力的作用，并考虑了泥沙颗粒受力非平衡条件，采用牛顿力学的矢量分析法，推导了泥沙输移的通用矢量式。经对公式简化，且用Ikeda和笔者试验资料的验证，证明计算值与试验值吻合较好。     

Quasi-saturation capacitance behavior of a DMOS device

This paper reports a simulation study on the capacitance characteristics of a double-diffused metal-oxide semiconductor (DMOS) device operating in the quasi-saturation region. From the analysis, the capacitance effect of the gate oxide upon the drift region cannot be modeled as an overlap capacitance, because the drain-gate/source-gate capacitances of the DMOS device may exceed the gate-oxide capacitance due to the larger voltage drop over the gate oxide than the change in the imposed gate bias when entering the quasi-saturation region. This effect can be the explanation for the plateau behavior in the gate charge plot during turn-on and turn-off of the DMOS device. Based on the small-signal equivalent capacitance model, the accumulated charge in the drift region below the gate oxide may thoroughly associate with the drain terminal in the prequasi-saturation region and with the source terminal in the quasi-saturation region     

Design and implementation of the tree-based fuzzy logic controller

In this paper, a tree-based approach is proposed to design the fuzzy logic controller. Based on the proposed methodology, the fuzzy logic controller has the following merits: the fuzzy control rule can be extracted automatically from the input-output data of the system and the extraction process can be done in one-pass; owing to the fuzzy tree inference structure, the search spaces of the fuzzy inference process are largely reduced; the operation of the inference process can be simplified as a one-dimensional matrix operation because of the fuzzy tree approach; and the controller has regular and modular properties, so it is easy to be implemented by hardware. Furthermore, the proposed fuzzy tree approach has been applied to design the color reproduction system for verifying the proposed methodology. The color reproduction system is mainly used to obtain a color image through the printer that is identical to the original one. In addition to the software simulation, an FPGA is used to implement the prototype hardware system for real-time application. Experimental results show that the effect of color correction is quite good and that the prototype hardware system can operate correctly under the condition of 30 MHz clock rate.     

光刻胶灰化工艺与深亚微米线条的制作

随着器件尺寸的缩小，细线条的制作成为很关键的工艺，普通光学光刻已接近其分辨率的极限，而电子束光刻和Ｘ射线光刻技术复杂、费用昂贵。本文对光刻胶灰化工艺进行了分析和研究，并应用此工艺进行了深亚微米线条的制作，在普通光学光刻机上制作出宽度小于０．２５μｍ细线条。我们已将此工艺成功地应用在深亚微米ＭＯＳＦＥＴ的制作中。     

聚六亚甲基碳酸酯二醇增韧环氧树脂的结构与性能

采用羟基封端的脂肪族碳酸酯－聚六亚甲基碳酸酯二醇对环氧树脂进行了增韧，通过扫描隧道显微镜，扫描电子显微镜，差示扫描量热分析以及动态力学性能分析等方法研究了增韧ＥＰ的结构与性能的关系。     

特征提取在硅内部微/纳米级体缺陷检测中的应用

提出了一种利用特征提取来对硅中微/纳米级体缺陷的激光散射图样进行分析,以获得缺陷大小信息的分析方法.给出了该方法中第一特征值和第二特征值的定义,指出通过所提出的第一特征值及第二特征值即可迅速地判断出缺陷的大小量级所在.这种分析方法具有分析速度快,在体缺陷小于1μm时分辨率高,且可使系统实现自动化等优点.     

印制板液态感光阻焊油墨的工艺控制

本文介绍印制板液态感光阻焊油墨的工艺流程、工艺控制，并对生产中较常出现的几种质量问题进行讨论，进而提出解决措施。     

非致冷焦平面热成象技术及其应用

９０年代以后，非致冷红外焦平面技术的实用化成为红外热成象技术中最引入注目的突破之一，基估军事和民用领域的广泛应用前景受到国内外的普遍重视。本文综述了非致冷红外焦平面技术的两大技术途径及其特点、发展趋势和应用情况，并了发展我国非致冷红外焦平面技术的途径。